Modern motherboards have increasingly been short on USB headers. For example a rear bracket with 4 USB ports has been available for years.

Today however the bracket has largely given way to USB cards which are actually less expensive.

Most recently USB 3.0 PCIe cards have largely replaced the older USB 2.0 PCI cards. Still there are some recent motherboards with old style PCI slots to support existing hardware.

9-pin USB 2.0 hub

Today with the proliferation of USB 2.0 hardware such as The HX1000i PSU and the WiFi card the demand for USB exceeds the available ports. Front panel USB ports want in on the headers as well as flash card readers.

9-pin USB 2.0 hub

Fortunately there are mass produced components to deal with the problem. Low cost USB 2.0 hubs are ideal for cable management. Extension cables are also available to easily place hubs on the motherboard tray.

The top USB hub has the undesirable feature of being vertically mounted while the lower USB hub is 90° angled.

Double sided tape can conveniently attach the hub to the motherboard tray. USB 2.0 can be 5 hubs deep without problem. If several spitters are needed they should be branched out.

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Create a website or blog at

Up ↑

Create your website at
Get started
%d bloggers like this: